WP3-26
Droneport: an autonomous drone battery management system
| ID | WP3-26 |
| Contributor | UWB and SM |
| Levels | Functional |
| Require | Communication service to obtain data from the assigned drones and master controller |
| Provide | Autonomous battery exchange and management for UAV |
| Input |
|
| Output | Available battery resources |
| C4D building block | Health management, Mission management |
| TRL | 4 |
<video type="html5">/myWiki/resources/assets/my-video.mp4</video>
Detailed Description
Droneport (DP) is a system for autonomous drone battery management. Droneport complies with a reference architecture, dealing with drone power management, more precisely battery management. Regarding the reference architecture, the DP consists of a battery management unit for charging and storage, a robotic manipulator for automatic battery exchange, a data link to the drone,a telemetry data broadcast and remote command and control human machine interface(HMI). Power and storage management building blocks are implemented in Droneport, with a datalink connection to the outside world. Users can use telemetry data via MAVLink protocol to monitor the state of the DP. The DP acts autonomously, it monitors the state of the batteries, controls the charging and battery exchange process provides necessary navigation information for drone landing and broadcasts the status of the remaining batteries.
Contribution and Improvement
The Droneport aims to extend the UAV missions by autonomously changing the battery of the drones.
The main goal was to develop a drone Battery management architecture fulfilling a few fundamental objectives:
- battery charging and swapping automatically
- extending the UAV operational time from minutes to hours or more
- MAVLink based data communication standards
- compact and easy handling
- reasonable purchasing/maintenance costs
The DP behaves as a standalone autonomous unit that is wirelessly interconnected with one or more UAVs. It is compatible with other C4D components. It uses an open MAVLink protocol with defined messages for communication and commands. The DP was developed as a part of Comp4Drones project from the scratch up to the technology readiness level 4 (TRL4). At the beginning of the project, there was only a notion of how to extend the operational time of UAV missions.
Design and Implementation
Figure 85: Droneport manipulator arm with a custom gripper
The Droneport development is done together with SmartMotion company. Our team collaborates together on hardware and software design. The DP will be a unique device that will be able to communicate with various UAVs. For better support of battery exchange, the DP contains a newly designed gripper and a special battery holder. Droneport hardware consists of:
- Drone landing place with ArUco based landing markers
- Uniquely designed robotic manipulator
- Uniquely designed gripper
- Battery management unit for charging and storage
- Wireless communication to the drone/swarms
- The whole device will communicate wirelessly over MAVLink protocol [29] with other devices in the network. The device is controlled using Linux based PC with REXYGEN [34] as real-time control software.
Droneport SW architecture consists of:
- Drone to DP communication protocol (defined MAVLink messages)
- Drone landing assistant - vision navigation to ArUco markers
- Battery exchange system control - manipulator controller
- Charge control - communication interface between charges and battery slots
- Battery management software
- DP software provides an open API for interoperability with various drones flight controllers.
Figure 86: Top view of the Droneport with landed drone
Simulation
see tools repository